No-Drill Hair Dryer Holder: How to Mount One Without a Drill
Updated 15 November 20264 min read


Nobody enjoys drilling into bathroom tiles, which is why "no-drill hair dryer holder" is one of the most searched terms in the whole category. The good news: there are two good ways to do it. A mount that sticks on, put up with a little care, and a tripod that needs no wall at all. The HandsFreeDryer has a wall mount and a tripod.
What makes an adhesive mount hold
Three things decide it, and all three are in your hands.
- 01The surface. Adhesive bonds well to smooth, sealed surfaces. Glazed tiles and glass are ideal.
- 02Preparation. Clean the spot (isopropyl alcohol works well), let it dry completely, and place the mount on one tile rather than across a grout line, so that all of it touches the surface.
- 03Patience. Press it on firmly, then give the bond time to settle before it carries anything.
How to put it up, step by step
- 01Choose the spot. Stand where you normally dry your hair, within reach of a socket, and mark a height that suits you.
- 02Clean and dry the surface.
- 03Press the mount on and hold it firmly.
- 04Wait for the bond to settle.
- 05Dock the dryer. Turn it, tilt it, let go.

No wall at all: the tripod
The other no-drill answer leaves the wall alone altogether. A tripod stands on the counter, the dressing table or a desk, and moves with you from room to room. It is also the one that travels.

If you would rather drill
Two screws in the wall, put in with the right drill bit and wall plugs, take a quarter of an hour and are there for good. If you rent, ask: many landlords accept two small holes beside the mirror.
Where the HandsFreeDryer fits in
This journal belongs to a hair dryer that brings its own holders. On the wall, the LELUNAR® HandsFreeDryer docks on its own wall mount, which can be stuck on or screwed in: both are possible. On the table, it stands on a folding tripod. On both it sits on a ball joint, so you turn it, tilt it and let go, and when you want an ordinary handheld dryer, the tripod folds into the handle. For travel, the folding tripod stores inside the travel capsule.

Underneath, it is a complete hair dryer: a 100,000+ RPM motor, 1200 W, four heat settings, three speeds and Cold Airflow.
How the tripod and the wall mount work, side by side, is in hair dryer holder: tripod, wall mount or both?
Checklist before you mount
- 01Pick the spot. Where you normally stand, within reach of a socket, at a height that suits you.
- 02Check the surface. Smooth and sealed for a mount that sticks on; a solid wall for screws.
- 03Clean, dry, press, wait. Good preparation is what makes an adhesive mount last.
- 04Dock the dryer and aim it. Turn, tilt, let go.
Practical answers about the HandsFreeDryer, from aiming the ball head to cleaning the rear filter, are in the FAQ. And if one hand is all you have right now, read seven ways to dry your hair with one hand.
Follow @handsfreedryer for the latest.

